Multi Mount JK Installation

STEP ONE: TRIM REMOVAL

Using a trim removal tool, carefully remove the grab bar cover by working your way around the cover and popping it out of mounting clips. The bolts on this cover is for appearance only, they are not real bolts.

STEP TWO: REMOVE GRAB BARS

Removing the trim cover will reveal the grab bar bolt on each side. Simply unbolt both 8mm bolts to remove your grab bars away from the dash.

STEP THREE: INSTALL MULTI-MOUNT

Now you can install the Multi-Mount onto the grab bars. The Multi-Mount holder is placed on the left side (driver side) of your grab bars. There is an additional space that is included with your Multi-Mount and should be placed on the right side.

STEP FOUR: RE-INSTALL GRAB BARS

You can now re-install the grab bars with Multi-Mount back into the dash. Make sure to install the two bolts back into their locations to secure the grab bars to dash.

Congrats, you have now finished your installation of Multi-Mount.