Multi Mount JL Installation
STEP ONE: TRIM REMOVAL
Using a trim removal tool, slowly work your way around the dash and carefully pry the trim away from its housing. Make sure not to force anything as to avoid breaking any mounting clips.
STEP TWO: BOLT REMOVAL
With a 10mm socket, remove the bolt on the left side of your Jeep's grab bars. Removing this bolt should allow you to pull the grab bar away from the dash.
STEP THREE: MULTI-MOUNT PLACEMENT
STEP FOUR: REINSTALL DASH
Reinstall the dash by reversing the steps for removal. You are now complete with your installation!